QIDI TECH X-Max 3 3D Printer

Highlights

QIDI TECH X-Max 3 3D Printer Main Features

QIDI Tech X-Max 3 3D printer is based on Klipper, capable of printing at a maximum speed of  600mm/s with 20000mm/s² printing acceleration and 35mm³/s extruder flow. Apart from the Klipper firmware, the printer also features a high-speed extruder and a CoreXY structure, making it, therefore, the best high-speed FDM printer of the industrial-grade lineup.

• High-speed industrial-grade FDM machine
• Print speed up to 600 mm/s
• Heated build chamber
• High-speed extruder with a max temperature of 350 °C
• Automatic bed leveling
• Faster Speed 600mm/s
• 325*325*315 mm
• High-Flow 35mm³/s
• Acceleration: 20000mm/s²

QIDI TECH X-Max 3 3D printer comes with:

• Two hotends (Copper alloy nozzle hotend & Hardened steel nozzle hotend)
• Dryer box
• Spool of filament
• All the necessary tools

New All-metal Frame

The all-metal frame is ultra-stable, reinforced with metal crossbeams at the bottom, and resistant to deformation.

High-grade Hardness Steel Linear Hollow Optical Axis

Improved surface straightness, and a 60% lower error deflection. Highly durable and has no need for frequent maintenance.

CoreXY Structure

With TMC2209 silent drive and CoreXY structure, this 3D printer can reduce motion Inertia and improve the motion speed, offering a low-noise printing experience.

High-Speed Extruder with Cooling System

The extruder with a 9.5:1 transmission ratio is steadier, stronger, and faster. The new cooling system can reduce the risk of clogs and ensure smooth extrusion.

Two Sets of Hot End

Copper alloy nozzle for better thermal conductivity, smooth printing and to be more durable. Hardened steel nozzle for abrasive materials, and long-term usage. While both have a max print temp of 350 Celsius.

Temperature Controlled Chamber and Drying Box

With an independent heating device that has a maximum temp of 65 Celsius, QIDI X-Max 3 3D printer can high-efficiency print PET-CF, PAHT-CF, etc. It also has a chamber circulation fan with an activated carbon air filter.

No Layer Separation

The higher the temperature in the heated chamber, the larger the material range that can be printed. The heated chamber ensures that the part is built uniformly without the generation of internal stresses.

Automatic Levelling

Klipper adaptive meshing and purging, fast ensure flawless first layer for every 3D print.

Flexible HF Board

The double-sided flexible magnetic HF plate has excellent adhesion, no warping trouble, and is easy to remove the prints.

Excellent User Experience

The highly acclaimed QIDI slicer software has both normal mode and expert mode, which is also easy for beginners to get started. It also supports other third-party software, such as Ultimaker Cura, Simplify3D, PrusaSlicer, etc.

QIDI Tech X-MAX 3 – Designed for Industrial Grade 3D Printing 

QIDI Tech X-MAX Plus 3， a high-speed upgrade of the X-MAX model with a larger build volume of 325*325*315mm and a number of improvements aimed at high performance and industrial-grade print quality. Like the X-MAX, the X-MAX 3 comes pre-assembled and ready to work within 10 minutes after unboxing. The machine is fully enclosed and boasts an actively heated build chamber with an independent heater and a maximum temperature of 65 °C, which ensures reliable printing with high-performance thermoplastics. The chamber is equipped with a circulation fan with an active carbon air filter for better printing results and a safe environment.

Based on the CoreXY kinematics and equipped with Trinamic TMC2209 silent stepper drivers, the QIDI X-MAX 3 prints at a lightning-fast speed of 600 mm/s and acceleration of 20000 mm/s² yet works quietly. As an added bonus, the resonance compensation function allows for reducing the impact of vibrations, ensuring high print quality without visible artifacts. The use of carbon rods on the X-axis and a more lightweight extruder with a 9.5:1 gear ratio reduces the weight of the whole structure making for smoother and faster movements. The X-MAX 3 features automatic 16-point bed leveling with a BLTouch sensor to ensure good first-layer adhesion and prevent part deformation.

Heating Up To 350 °C

The QIDI Tech X-MAX 3 is equipped with a direct drive extruder featuring a maximum flow rate of 35 mm³/s. It comes standard with two high-temperature hotends that can heat up to 350 °C, allowing for printing with most engineering-grade thermoplastics. The copper alloy nozzle delivers excellent thermal conductivity and is capable of processing common filaments, while the durable hardened steel nozzle is ideal for abrasive materials.

The standard 0.4 mm nozzle can be replaced with optional 0.2, 0.6, or 0.8 mm nozzles. With a minimum layer height of 50 microns, the X-MAX 3 produces accurate models with a smooth surface finish. The print bed heats up to 120 °C and features a magnetic flexible build plate that ensures good adhesion and easy print removal.

Compatible with Nylon, PC, fiber-reinforced Composites, PLA, ABS, ASA, PETG, and flexibles

The X-MAX 3 is compatible with a wide range of proprietary and third-party filaments. Its high-temp extruder and fully enclosed heated build chamber allow for handling high-performance materials such as Nylon, PC, fiber-reinforced composites, and others, alongside common PLA, ABS, ASA, PETG, and flexibles.

QIDI Slicer Software 

The QIDI X-MAX 3 boasts a 5″ color touchscreen with 800 x 480 resolution, which is easy to navigate. The machine has various connectivity options including Wi-Fi, Ethernet, and USB.

The QIDI slicer software has both normal mode and expert mode, which is easy for beginners to get started. 

 325 x 325 x 325 mm Print Size

Compared to its predecessor, the X-MAX 3 sports a more spacious build chamber of 325 x 325 x 325 mm, allowing for printing fairly large parts or batches of smaller models.

Package List 

• QIDI Tech X-MAX 3 3D printer
• Two hotends
• Filament dryer box
• Spool of filament
• Filament spool holder
• Tool set
• 0.4 mm nozzle cleaning tool
• Desiccant
• Power cord
• Ethernet cable
• Scraper
• Glue stick
• USB 2.0 stick
• Spare parts kit

Specification